Designed by SEB, BeerTender is the gold standard in home beer dispensers. Using 5L kegs, it allows you to pour around 9 delicious pints. Just activate its handle and enjoy a professionally poured draught beer from the comfort of your own home. BeerTender draws inspiration from the aesthetics of bar tap systems, combining robustness and efficiency. With its user-friendly handle and electronic cooling system, experience the ritual of a professionally poured draught from your kitchen, living room or home bar. The beer machine will fit seamlessly into your space with its elegantly designed options in various colours across multiple models. BeerTender setup guide: loading a 5L keg 1. Cool the keg Refrigerate your keg for a minimum of 8-10 hours. Click one of the BeerTender service tubes into the neck. Ensure to use a new tube for each new keg, as any impurities in the tube could cause abnormal foaming and degrade the quality and taste of your beer. 2. Load the keg Slide the keg inside the machine, leaving the serving tube on top. To open the machine, simply push the part below the digital display and release: the cover will open. 3. Instal the serving tube Swing the handle to the left, remove the tap spout cover, and clip the serving tube into the dispensing tube. Replace the tap spout cover. 4. Close the machine and pour Close the lid and wait until the thermometer on the display turns green, indicating your beer is at the ideal serving temperature. Your BeerTender is now ready. How to serve draught beer with BeerTender 1. Wait until the beer is cold Wait until the thermometer on the display turns green: the beer is now at the right temperature. To save time, put your kegs in the fridge before loading them into your BeerTender. That way your beer will be fresher, faster! 2. Rinse the glass To get a perfect head, always use a clean glass rinsed in cold water. The slightest impurity in the glass could cause your beer to froth abnormally, reducing its quality and taste. 3. Tilt the glass For a professional result, tilt your glass at 45° under the spout. This position gives you the perfect balance between beer and foam. 4. Serve Keep your glass tilted and quickly pull the handle downwards. At the end of serving, raise your glass and pull the handle back up.TIP: If you have too much foam, your beer is not yet fresh enough or there are impurities in your glass. 5. Equalise the foam If your foam is sticking out of the glass, remove the excess using a foam cutter. Perfect foam is about the width of the foam cutter. It protects the beer and allows it to retain all its aromas. TIP: If you're using a beer glass, a mark indicates where the foam neck should start. Why choose BeerTender? With its intuitive design and consistent results, BeerTender makes it easy to enjoy draught beer at home. Whether you’re hosting friends or relaxing after work, it delivers pub-quality pours with minimal effort. Explore compatible 5L kegs and beer accessories to get the most out of your home beer dispenser.